top of page
TRAIN SENSOR

RA-Series

Synthetic TRAIN detection sensor

RA-400 is an innovativesynthetic sensorthat has asmart signal processing unit, and it is internally composed of 2 sensors ofpatented FS magnetic and 60GHz RADAR sensorto detect a train on railways. It detects only trains and do not make false alarm for rain or snow under various noises on the railway.

Detection a train on railroad with the high reliability is not a easy task because of the many kinds of severe noise exists around railways.MAGOtechnology has the special signal processing technology for detecting trains on railway of harsh environment.

RA_400_01.jpg

RA-400

RA-400 The sensor can be installed both on the center of two rails and on the side of railways. The sensor includes the specially designed PCR radar and the FS magnetic sensor to eliminate noises from various EMI sources near the rail road.

Both of a feedback stabilizing magnetic sensor and a millimeter wave radar are embedded inRA-400, and heavy rain can not effect the performance of the sensor. RA-400detects the movement and stop of a train, and user can easily connect the output of the sensor to an user's device by a relay controller.  

Using the dry connector in a relay controller, user can easily build up an alarming system for the safety of constructors or pedestrians. 

RA_400_설치EA.JPG
RA_400_설치EB.JPG

< at the center of the railroad >        _cc781905-5cde-3194- bb3b-136bad5cf58d_           _cc781905- 5cde-3194-bb3b-136bad5cf58d_         _cc781905-5cde-3194-bb3b -136bad5cf58d_   < at the side of the railroad >

LD Sensor

CARDET-LD The sensor is a single point LIDAR sensor for mid-long range vehicle sensing including railroad car.

It can be installed at the side pole of the track with a reflex plate below, or at the higher place with a declined angle without reflex plate.

Conventional IR sensor measures simply the quantity of reflexed light, so the noise light from Sun directly affect the performance of the IR sensor, butCARDET-LD measuresTOF(Time of Flight) with a special LASER burst not just the quantity of the beam. This principle makesCARDET-LDsensor has such a strong characteristics against Sun and bright noisy lights. 

Owing to the sensing principle of TOF light sensor, it can be used in very heavy electro magnetic noise environment such as a rail road or inside factory with confidence.

CARDET-LDdetects the approach and pass of a train, and user can easily connect the output of the sensor to an user's device by a relay controller.  

열차_LD_반사면설치2_en.PNG
열차_LD_PC침목설치_en.PNG

One

RA-400

Basic Set

relay controllerhas a RELAYfor interface the sensor to users system very easily. Users can build up safer environment around railway or train garage withRA-Series with easy effort and low price.
 
Composed of:

RA-400 Sensor Head + Relay Controller

RA_400_01.jpg
제목 없음-4.png
CARDET-LD_Ver2.png
제목 없음-4.png

2

CARDET-LD
Basic Set

relay controllerhas a RELAYfor interface the sensor to users system very easily. Users can build up safer environment around railway or train garage with a train sensor with easy effort and low price.
 

Composed of:

LD Sensor Head + Relay Controller + Bracket + Cover + Reflex sheet

3

LORA
Wireless Set

Using LORA Wireless System, the detection signal ofRA-SeriesThe sensor can be monitored from more than 10 km ahead (no obstacle case) when a train is coming. This package is very helpful for improving safety of the workers under construction.

 
Composed of:

LoRa Transmitter + LoRa Receiver

LoRa_trans_02.png
LoRa_trans_02.png

4

Train sensor
Installation reference

Option Modules

A variety of options for RA-Series are available for improving safety of user's system.

Stand-alone Controller

Stand-alone controller need not connecting to PC to use the CARDET.

Wireless/Wire LAN Interface

Use the Wireless/Wired LAN Interface You can install the CARDET to network system.

USB Interface

Use the USB Interface to connect the CARDET sensor head with PC or laptop.

LoRa_trans_02.png

RF Transmitter / 

Receiver / Repeater

Used for long distance installation of the system.

bottom of page